In-Ear Handsfree SWISSTEN UL-9 black

In-Ear Handsfree SWISSTEN UL-9 black

Mere info:

Ekstremt lett handsfree i elegang utførelse.

Mere info:

Technical parameters:
Standby time: up to 100 hours
Talk time: up to 4 hours
Playback time: up to 4 hours
Bluetooth version: v3.0 + edr
Profile: A2DP / HFP / HSP
Chipset: CSR
Technology: CVC noise reduction
Functional distance: 10 m
Weight: 10 g

1. Charging slot
2. MF button
3. Volume control
4. Light indicator
5. CVC microphone

Charging the headset
Use only authorized AC adapters or a PC connection to charge the headset. Unauthorized chargers can damage the headset or, in extreme cases, even explode. They may also invalidate the product warranty. Never answer or make a call while the headset is charging.

Volume control
To increase / decrease the volume, press +/-.

Light indicator
1. Pairing mode: the red and blue lights flash alternately
2. Connected: the blue light flashes every 3 seconds
3. Incoming call: the red light flashes
4. Standby: the blue light flashes every 3 seconds
5. Charging: the red light is on
6. Charging complete: blue light on
7. Switching off: the red light turns on and off

Using the MF button
Answer / end a call: press the button once
To reject a call: press and hold for 2 seconds
To redial the last number dialed: press twice
Siri / Voice dialing mode: press once (if supported by phone)
To reconnect: press the button
Play / pause a song: during playback, press the button
Pairing mode: hold the button for 5 seconds


Measures
- Do not use a voltage higher than that specified in the specification.
- Keep the headset dry and clean. Do not immerse in liquid or otherwise expose it to moisture.
- Do not disassemble, throw into fire, or expose it to high pressure or high temperatures.
- Do not allow unqualified users and children to use this headset.
- The battery may become slightly warm during charging.
- Do not remove the rubber plug from the headset. You may cause irreparable damage to the headset.

Pairing headset with phone
1. Activate the Bluetooth function on your phone and search for Bluetooth devices.
2. Select "SWISSTEN IN-EAR" from the list of available devices on your phone. Follow the pairing instructions that appear on your phone. If the mobile phone requires a passcode, enter "0000" and press OK.

Note: To increase the chances of successful pairing, make sure that the headset is within 0.3 m of your mobile phone.

Wearing instructions
You can wear this headset on one of your ears. You can flip the clip to make sure the speaker fits well and the headset is comfortable to wear.

Pair with multiple devices
1. Turn off the Bluetooth function on your phone A after it has been connected to the headset.
2. Restart the headset and pair it with phone B.
3. Switch on phone A, it will be automatically paired with the headset. (some mobile phones require confirmation by clicking "OK" when prompted)

Position the headset at a functional distance
The functional distance between the headset and your mobile phone is 10 m. Beyond this distance, the headset may not function properly or may disconnect.

Low battery warning
Please recharge the headset when you hear a beep from your headset speaker.

How to reconnect
When you get back to the functional distance, the headset reconnects to the last phone. Otherwise, try to reconnect the headset manually on your mobile phone.

Restore factory settings
Hold the MF button for a few seconds while charging. Wait until the red and blue lights flash alternately, then release the button.

Parameters and specifications

Talk time:

4 h

Emergency hours:

100 h

Charging time (h):

1,5 h

Weight (g):

9 g